JVC KD-A615 User Manual
Page 39
39
ENGLISH
Symptom
Remedy/Cause
Bluetooth
*
2
The unit does not make pairing
with the Bluetooth device.
• Enter the same PIN code for both the unit and target
device.
• Select the device name from “SPECIAL,” then try to
connect again. (
12)
• Try to pair/connect from the Bluetooth device.
Echo or noise occurs.
Adjust the microphone unit position.
Phone sound quality is poor.
• Reduce the distance between the unit and the
Bluetooth mobile phone.
• Move the car to a place where you can get a better
signal reception.
The sound is interrupted or
skipped during playback of a
Bluetooth audio device.
• Reduce the distance between the unit and the
Bluetooth audio device.
• Disconnect the device connected for “BT-PHONE.”
• Turn off, then turn on the unit.
• (When the sound is not yet restored,) connect the
device again.
The connected audio device
cannot be controlled.
Check whether the connected audio device supports
AVRCP (Audio/Video Remote Control Profile).
HD Radio reception
Sound quality changes when
receiving HD Radio stations.
Fix the reception mode either to
17, 26)
No sound can be heard.
•
broadcast of HD Radio station. Select
17, 26)
•
signals or receiving conventional radio broadcast.
Select
17, 26)
“RESET 8” appears on the
display.
Reconnect this unit and the HD Radio tuner box
correctly, then reset the unit.
EN34-43_KD-R618_A615_R610[J]f.indd 39
EN34-43_KD-R618_A615_R610[J]f.indd 39
11/19/09 11:36:47 AM
11/19/09 11:36:47 AM