JVC KD-A615 - Manual (Page 15)

15 ENGLISH
Changing the Bluetooth settings
1
] “BT-PHONE” or “BT-AUDIO”
2
] Bluetooth menu
3
] “SETTINGS”
4
] Select a setting item.
AUTO CNNCT
j AUTO ANSWER * 1
j MSG INFO * 2 j MIC SETTING * 1
j VERSION * 3 j (back to the
beginning)
5
] Change the setting accordingly. For
setting menu,
right column.
* 1 Appears only when a Bluetooth phone is
connected.
* 2 Appears only when a Bluetooth phone is
connected and it is compatible with text
message (notified through JVC Bluetooth
adapter).
* 3 Bluetooth Audio: Shows only “Version.”
Setting menu [Initial: Underlined]
AUTO CNNCT (connect)
When the unit is turned on, the connection is
established automatically with...
OFF:
No Bluetooth device.
LAST: The last connected Bluetooth device.
ORDER: The available registered Bluetooth
device found at first.
AUTO ANSWER
Only for the device being connected for
“BT-PHONE.”
ON:
The unit answers the incoming calls
automatically.
OFF: The unit does not answer the calls
automatically. Answer the calls
manually.
REJECT: The unit rejects all incoming calls.
MSG INFO (message info)
Only for the device being connected for
“BT-PHONE.”
AUTOMATIC: The unit informs you of the
arrival of a message by ringing
and displaying “RCV MESSAGE”
(receiving message).
• The display illuminate in blue.
(, 26)
MANUAL: The unit does not inform you of
the arrival of a message.
MIC SETTING (microphone setting)
Only for the device being connected for
“BT-PHONE.” Adjust microphone volume
connected to the Bluetooth adapter,
[LEVEL 01/02/03].
VERSION
The Bluetooth software and hardware versions
are shown.
EN10-23_KD-R618_A615_R610[J]f.indd 15 EN10-23_KD-R618_A615_R610[J]f.indd 15 11/19/09 11:36:21 AM 11/19/09 11:36:21 AM