JVC SR-DVM70US - Manual (Page 27)

Masterpage:Right+
EN
27
Filename [DVM70S_06DVD Operation.fm]
BASIC OPERATIONS ON DVD DECK
Page 27Friday, 6 May 2005 12:06
Marking Positions To Play Back Again Later
It is possible to mark positions (up to 999 points) where you want
to play back once again later, and start playback from a marked
position. Marking onto DVD-RAM/RW (VR mode only) discs when
recording is helpful to locate a start point when you play back the
discs later.
To mark positions:
During playback, press MARK at
positions you want to mark.
● AMARKB appears on the TV screen.
You can easily locate the marked
positions using
S or T when
you play back the disc.
To delete the marked positions:
While paused, press
S or T to
locate a marked position you want to
delete, then press MARK.
● Crossed AMARKB appears on the
TV screen, and the marked position
is deleted.
NOTES:
● When a monaural program changes to a stereo program while
recording, a mark signal is automatically recorded.
● For DVD-R/RW (Video mode) discs, marks are assigned
automatically every 5 minutes.
● If MARK is pressed when playing back a disc that does not allow
marks to be inserted,
A7B appears on the TV screen.
Checking The Time Information
You can check time information of a disc on the front display panel
and the TV screen.
8 DVD-RAM/DVD-R/DVD-RW
Each press of DISPLAY on the remote control or the unit changes
the display as follows:
During recording
Clock time (front display panel only) N Current title elapsed time
N Disc remaining time* N (back to the beginning)
* only discs before finalizing
During playback
Each title elapsed time N Current title elapsed time N
Disc remaining time* N (back to the beginning)
* only discs before finalizing
During recording/playback or in stop mode
Press REC MODE.
● The disc remaining time according to recording modes appears
on the TV screen.
● It is possible to check disc remaining time according to recording
modes also by pressing REMAIN.
● In FR mode, it is possible to set recording time in detail. While the
recording mode and the disc remaining time are displayed by
pressing REMAIN, press
F G to select AFRB, then press D E to
select the desired recording time. (A pg. 36)
● It is not possible to switch the recording mode during playback or
while recording.
8 Video CD/SVCD/Audio CD
During playback or in stop mode
Current track elapsed time N Current track remaining time N Total
elapsed time N Total remaining time N (back to the beginning)
NOTE:
When a PBC-compatible Video CD/SVCD disc is loaded,
deactivate the PBC function. (A pg. 28)
Angle Selection
You can enjoy a variety of scene angles if a DVD VIDEO disc
contains
Amulti-angleB parts, where the same scene was shot from
different angles.
If the disc contains
Amulti-angleB parts, AyB appears on the TV
screen at the beginning of the Amulti-angleB part.
1
Press ANGLE during
playback. The angle selection
display appears on the TV
screen.
2
Press ANGLE or D E to select
your desired angle.
● Each time you press ANGLE or D E, the angle changes.
● When A7B appears on the TV screen, the current scene is not
recorded from multiple angles. In addition, some discs prohibit
angle selection.
● To clear the angle selection display, press ENTER. In addition,
the angle selection display disappears automatically if no
operation is done for 10 seconds.
ENTER
RETURN MENU
T/NEXT
DVD
MARK
o
I
S/PREVIOUS
DISPLAY
REC MODE/REMAIN
SET UP
AUDIO
ANGLE SUBTITLE
0-9
FGDE
CABLE/DBS
DVD TV
When 3 scene angles are
contained.
DVM70S_00.book Page 27 Friday, May 6, 2005 12:06 PM