Jabra GO 6430 - Manual (Page 11)

11
english
Jabra GO 6430 User manUal
SySteM SetuP and connectionS 4.
this chapter explains how to assemble your Jabra GO solution and connect it to your other office equipment.
chaRGinG the headSet 4.1
to charge the headset, insert it into the travel Charger and connect the mini-Usb port on the travel Charger to
a power source as illustrated below. the headset led will change from red to yellow while charging, then to green
when fully charged. If the headset is functioning while charging, the led can change to other colours and blink
to indicate other events/changes in state. see the section “headset visual Indicators (led)” for more.
Tip: the charge time from either pC or car cigarette-lighter socket is much longer than the charge time
from mains power.
Figure 5: Charging the headset