Tuning into a preset station, Manual preset, Fm1 fm2 fm3 – JVC KS-FX210 User Manual

Page 8

ENGLISH

KS-FX210 [EN] GET0052-001A [J]

Manual preset

You can preset up to 6 stations in each band (FM1,
FM2, FM3 and AM) manually.

Ex: Storing an FM station of 88.3 MHz into the

preset number 1 of the FM1 band

Select the band (FM1 – 3, AM) you
want to store stations into (in this
example, FM1).

Each time you press the button, the FM
band changes as follows:

Tune into a station of 88.3 MHz.

Press and hold the number button
(in this example, 1) for more than
2 seconds.

Preset number “P1” flashes for a while

Repeat the above procedure to store
other stations into other preset
numbers.

Notes:
• A previously preset station is erased when a new station

is stored in the same preset number.

• Preset stations are erased when the power supply to

the memory circuit is interrupted (for example, during
battery replacement). If this occurs, preset the stations
again.

Tuning into a preset station

You can easily tune into a preset station.
Remember that you must store stations first. If you
have not stored them yet, see “Storing stations in
memory” on page 7.

Select the band (FM1 – 3, AM).

Select the number (1 – 6) for the
preset station you want.

To tune into stations
of higher frequencies.

To tune into stations
of lower frequencies.

FM1

FM2

FM3

A M

F M

BEAT POP SOFT

LOUD