JVC KS-FX210 - Manual (Page 10)

10
ENGLISH
KS-FX210 [EN] GET0052-001A [J]
TAPE OPERATIONS
Listening to a cassette
You can playback type 1 (normal) tapes.
1
Turn on the power.
Note on One-Touch Operation:
If a cassette is already in the cassette compartment,
tape play starts automatically. However, it is not
recommended to leave the cassette in the compartment
when turning off the power or ignition key. It may
damage the tape head and the cassette.
2
Insert a cassette into the cassette
compartment.
When one side of the
tape reaches its end
during play, the other
side of the tape
automatically starts
playing. (Auto Reverse)
3
Select the tape direction.
Press both buttons at
the same time.
Each time you press both
buttons, the tape direction
changes alternately –
forward (
) and
reverse ( ).
To stop play and eject the cassette.
Press
0
.
Tape play stops and the cassette automatically
ejects from the cassette compartment. The source
changes to the previously selected one.
• You cannot change the source if the cassette is
still in the cassette compartment.
To change source, you must eject the cassette
first.
• You can also eject the cassette by pressing
0
while the unit is turned off.
To fast-wind a tape.
Press in
¡
or
1
.
The tape will be wound in the direction of the
arrows (
¡ or 1 ).
Tape direction
To restart playback, lightly press the other
button which is not pressed in (
1 or ¡ ).
/I/ATT
PROG
PROG
EN10-KS-FX210[J]f-1 10/8/01, 10:15 AM 10