JVC KS-FX210 - Manual (Page 12)

12
ENGLISH
KS-FX210 [EN] GET0052-001A [J]
Storing your own sound
adjustments
You can adjust the sound modes (BEAT, POP,
SOFT) to your preference and store your own
adjustments in memory.
• There is a time limit in doing the following
procedure. If the setting is canceled before you
finish, start from step 1 again.
1
Call up the sound mode you want
to adjust.
• See page 11 for details.
2
Select “BAS” (Bass) or
“TRE” (Treble).
3
Adjust the bass or treble level.
• See page 11 for details.
4
To turn on or off the loudness
function.
Each time you press LOUD, the loudness
function turns on and off alternately. See page
11 for details.
5
Repeat steps 2 and 3 to adjust the
other items.
6
Press and hold SOUND until the
sound mode you have selected in
step
1 flashes on the display.
Your setting is stored in memory.
7
Repeat the same procedure to store
other settings.
To reset to the factory settings
Repeat the same procedure and reassign the
preset values listed in the table on page 11.
SOUND
LOUD
SOUND BEAT POP SOFT LOUD
BEAT POP SOFT LOUD
EN11-12-KS-FX210[J]f 10/8/01, 10:15 AM 12