Manual pan limit setup (continued) – JVC TK-C625 User Manual
Page 33
EN
33
Setting Up the Camera Using RM-P2580 (continued)
MANUAL PAN LIMIT Setup (continued)
8 Basic operation of Manual Pan Limit
●Panning operation will only be allowed within the valid range upon
setting the Manual Pan Limit.
●When the camera is moved by an operation that overrides the Manual
Pan Limit into a region outside the valid panning range, the camera will
function as follows when a manual Pan operation is performed.
●Pan operations can be freely performed outside the panning range until
the camera enters the valid range again.
●Upon entering the valid range, Pan operation will only be possible
within the Manual Pan Limit that has been set.
8 Operations that override the Manual Pan Limit
The following operations are performed without regard to the invalid
range as set by the Manual Pan Limit.
●Auto Pan operation
●Auto Trace operation
●Movement to preset positions
●Auto Flip operation
8 Settings that override the Manual Pan Limit
The following settings involve Pan operations but setting can be performed
without regard to the invalid range as set by the Manual Pan Limit.
●AREA DISPLAY Setup (DIRECTION)
MEMO
● If the AM. PAN LIMIT..B is AONB during setting of Auto Trace and preset positions,
Pan operation within the invalid range will not be possible. However, since Auto
Trace and movement to preset positions are operations that override the Manual
Pan Limit, panning within the invalid range of the Manual Pan Limit is possible if
setting of Auto Trace and preset positions are performed prior to the MANUAL PAN
LIMIT setup.
Valid Range
Right Limit
Invalid Range
Left Limit
TK-C625.book Page 33 Thursday, March 31, 2005 4:20 PM