JVC DOME CAMERA VN-C215V4U - Manual (Page 24)

24
Setup
Electricity can be supplied to this product either
by using the PoE or connecting to the DC12 V
power supply.
ⅷ When electricity is supplied to the camera,
the status indicator blinks, and turns off when
startup is complete.
Note：
● Make sure to select only one mode of
electrical supply. Connecting the power cable
and the LAN cable for the PoE at the same
time may result in failure or malfunction of the
camera.
Using the PoE
Connect to a device that supports PoE and
supply electricity from the LAN cable.
Memo：
● For details on the connection method and
cable type, please refer to ALAN Cable
Connection B (A Pg. 26).
Power Connection
What is PoE (Power over Ethernet)?
This is a function that enables operation of a
LAN equipment without a power cable by
supplying power simultaneously with the data
using a LAN cable.
Connect to PoE-
compatible device
VN-C215_EN.book Page 24 Monday, November 27, 2006 9:52 AM