JVC DOME CAMERA VN-C215V4U - Manual (Page 19)

19
Ⅵ Mounting
1.
Face the imaging direction mark ( j) in the
shooting direction and mount the camera.
2.
Secure the camera in 3 locations.
A Use a cross slot screw driver to push the
screw head of the ceiling mounting bracket
right in.
B While holding onto the screwdriver, turn it
approximately 90 degrees in the clockwise
direction. Pull out the screwdriver when it
stops.
C The ceiling mounting bracket is lodged on the
ceiling and the camera is secured.
Memo：
● To remove the camera, turn the screw head
of the ceiling mounting bracket (3 locations)
90 degrees in the anti-clockwise direction.
Ⅵ Image adjustment
When the camera is mounted, adjust the image
settings while looking at the actual image.
(
A Pg.27 eImage adjustmentf)
Ⅵ Mounting the Dome Cover
After the image adjustment is completed, mount
the dome cover.
Installation is complete when the dome cover is
mounted.
(
A Pg.29 eMounting the Dome Coverf)
FRONT
UP
B
A
1
2
Towards the shooting direction
VN-C215_EN.book Page 19 Monday, November 27, 2006 9:52 AM