JVC RX-665VBK - Manual (Page 50)

47
English
Note:
Refer to the manual supplied with
your VCR.
Operating Other Manufacturers’ Video Equipment
To change the transmittable signals for operating another
manufacturer’s VCR
1. Press and hold VCR (in the POWER section).
2. Press VCR.
3. Enter manufacturer’s code (two digits) using
buttons 1–9, and 0.
See the list below to find the code.
4. Release VCR (in the POWER section).
Following button can be used for operating the VCR:
VCR (in the POWER Turns on and off the VCR.
section)
After pressing VCR, you can perform the
following operations on the VCR:
CH +/–
Changes the TV channels on the VCR.
3
Starts playback.
1 Rewinds a video tape.
¡
Fast winds a video tape.
7
Stops operation.
8 Pauses. To resume playing, press 3.
5. Try to operate your VCR by pressing VCR POWER.
When your VCR turns on or off, you have entered the correct code.
If there are more than one code listed for your brand of VCR, try each one until
the correct one is entered.
Manufacturer Codes Manufacturer Codes
EMERSON 11, 26 PHILIPS 09
FISHER 29 RCA 05, 06
FUNAI 10, 14, 15, 16 SAMSUNG 24
GOLD STAR 12 SANYO 21, 22, 23
HITACHI 04 SHARP 27, 28
JVC 01, 02, 03 SONY 18, 19, 20
MITSUBISHI 13 SHINTOM 30
NEC 25 ZENITH 08
PANASONIC 07, 17
Manufacturers’ codes are subject to
change without notice. If they are
changed, this remote control cannot
operate the equipment.
CATV/SAT
TV/VIDEO
TV
CATV
CONTROLCD-DISC
SOUND
CONTROL
VCR AUDIO
CENTER REAR
(L)
100+ RETURN/ENTER
3 2 1
6 5 4
9 8
+10
7/P
10 0
CD
VCR
MUTING DVD MULTI
TAPE
DVD
POWER
TUN ER/
BAN D
TV
SOU ND
RM-SR665U
REMOTE CONTROL
TV VOLUME CH
ONE TOUCH
OPERATION
PHONO
VOLUME
DAP MODE 3D-PHONIC SURROUND
– REAR•R +
EFFECT DELAY TEST
SEA MODE SEA PRESET MENU
LIGHT
RX-665VBK(C)24-50 98.5.12, 11:31 AM 47