JVC RX-665VBK - Manual (Page 25)

22
English
5. Repeat steps 1 to 4 until you store all the stations
you want.
To cancel a stored preset station
Storing a new station on a used number erases the previously stored one.
To tune in a preset station
On the front panel:
1. Press TUNER/BAND so that the Control
5 5 5 5 5 / ∞ ∞ ∞ ∞ ∞ / 2 2 2 2 2 /
3 3 3 3 3 buttons work for tuner settings.
The lamp above the button lights up.
2. Press Control
5 5 5 5 5 / ∞ ∞ ∞ ∞ ∞ until “–PRESET+” appears on
the display.
3. Press Control
2 2 2 2 2 / 3 3 3 3 3 to select a preset channel.
Each time you press the button, the preset channels changes.
• Pressing Control
2 changes preset channels in
decreasing order.
• Pressing Control
3 changes preset channels in
increasing order.
From the remote control:
1. Press TUNER/BAND.
Each time you press the button, the band alternates
between FM and AM.
2. Press 10 keys to select a preset channel number.
• For channel number 5, press 5.
• For channel number 15, press +10 then 5.
• For channel number 20, press +10 then 10.
• For channel number 30, press +10, +10, then 10.
TUNER/BAND
TUNER/
BAND
100+ RETURN/ENTER
3 2 1
6 5 4
9 8
0
7/P
+10 10
DAP MODE 3D-PHONIC SURROUND
– REAR•R +
EFFECT DELAY TEST
SEA MODE SEA PRESET MENU
Note:
If you adjust the sound by using
SOUND CONTROL while
listening to a station, the 10 keys
will work for adjusting the sound.
To select a preset channel
number after the sound
adjustment, press TUNER/BAND
again, so the 10 keys will work for
selecting the preset channel
numbers.
RX-665VBK(C)1-23 98.5.12, 11:27 AM 22