Power and source leds, Specifications – JBL NO TOUR IBT User Manual
Page 9
9
www.jbl.com
E
ng
lis
h
pOwer and sOurce leds
The Power and Source LED colors change to indicate the state of
JBL On Tour iBT unit.
Power LED
Source LED
led
sTaTe
IndIcaTIOn
power led
Green, constant
JBL On Tour iBT is on, powered
by good batteries or its AC power
supply.
Amber, constant
Batteries are low.
Source led
White, constant
Apple cable (USB) is the active
source.
Blue, constant
Bluetooth source is paired and is
the active source.
Blue, flashing
JBL On Tour iBT is in Bluetooth
pairing mode.
Green, constant
Aux input connector is the active
source.
specIfIcaTIOns
Transducers
4 x JBL Odyssey
Amplifier
2 x 8 watts at 1% THD
Frequency response
100Hz – 20kHz
Signal-to-noise ratio
>85dB
Input impedance
>10k ohms
Battery size/type
AA /alkaline, NiMH
Maximum power consumption
30 watts
Power requirement (USA/Canada)
120 volts, 60Hz AC
Power requirement (Europe/UK)
220 – 230 volts,
50Hz or 60Hz AC
Power requirement (Japan)
100 volts, 50Hz or 60Hz AC
Power requirement (Australia)
240 volts, 50Hz or 60Hz AC
Dimensions (Diameter x H)
6-1/2" x 1-5/8"
(165mm x 41mm)
Weight
0.6kg (1.3 lb)
Features, specifications and appearance are subject to change without notice.