JVC AV 56WP94 - Manual (Page 66)

Button Functions
66
When you change the aspect ratios, it is different from their broadcast or recorded program.
Aspect Ratios (Continued)
Press the A SPECT button
• By pressing the A SPECT button, you can change the size.
NTSC, 480i, 480p,
HDCP 480p
HD, HDCP 1080i
Notes:
• You can also choose the size by pressing the π† buttons.
• When you change the aspect ratio or signal, reset the picture position to center.
ML/MTS
MTS technology allows several audio signals to be broadcast in analog at once, giving you a
choice in what you wish to hear with a TV program. In addition to mono or stereo sound, an
MTS broadcast may also include a second audio program (SAP).
Press the M L /M TS button
By every press of the M L /M TS button, you change
the mode
Notes:
• When you are receiving a digital broadcast, you can change the language by pressing the
M L /M TS button.
• Keep the TV in stereo mode to get the best sound quality. The sound will work in stereo
mode even if a certain broadcast is in mono sound only.
• Choose the mono setting to reduce excessive noise on a certain channel or broadcast.
• Selecting SAP will allow you to hear an alternative soundtrack, if one is available.
• MTS unavailable if your television’s Input source is in input 1, 2, 3 or 4 mode, as described
on page 61.
• ML/MTS will not work when you are using the Digital-In.
• You can also change the mode by pressing the π† buttons.
MTS
STEREO
SAP
MONO
ON AIR
ON AIR
720P, HDCP 720p
AV-56\65WP941 English 66 10/17/03, 1:03:11 PM