Setting up your tv – JVC LCT1445-001A User Manual
Page 8
6
PD-42DV2 (ASIA) / LCT1445-001A / English
ENGLISH
Setting up your TV
Ensure to lift up the TV with more than 2 people. TV is too heavy to lift up by yourself and TV fall causes
injuries and damage.
Installation
Depending on the model, the TV may come with a Wall Mounting Unit or Table Top Stand. In these
cases, a separate instruction manual is provided in addition to this manual. Read that instruction
manual and install the TV correctly.
• For models which are supplied without a Wall Mounting Unit or Table Top Stand, and for when using another unit to install the TV,
only use JVC units which were designed for this TV.
WARNING FOR WALL MOUNTING UNIT:
• Consult authorized service personnel for the installation of your TV in order to prevent accidents. Do not try to install your TV by
yourself.
• We are selling this product with the understanding that it will be assembled and installed by qualified service personnel.
• Please read the instruction manual of Wall Mounting Unit before starting installation in order to prevent accidents.
• We are not liable for any damage caused by faulty assembly, faulty wall mounting, insecure wall mounting, misuse, alterations, or
natural disasters.
Cautions for installation
• Do not tilt the TV towards the left or right, or towards the back.
• Install the TV in a corner on a wall or on the floor so as to keep cords out of the way.
• The TV will generate a slight amount of heat during operation. Ensure that sufficient space is available around the TV to allow
satisfactory cooling. See “Distance recommendations” on page 1.
Putting the batteries into the Remote control
Use two AA/R6 dry cell batteries.
Insert the batteries from the - end, making sure the + and - polarities are correct.
• Follow the warnings printed on the batteries.
• Battery life is about six months to one year, depending on your frequency of use.
• The batteries we supply are only for setting up and testing your TV, please replace them as soon as necessary.
• If the remote control does not work properly, replace the batteries.
PD-42DV2_Eng.book Page 6 Friday, October 17, 2003 11:43 AM