JVC LCT1445-001A - Manual (Page 20)

18
PD-42DV2 (ASIA) / LCT1445-001A / English
ENGLISH
Teletext function
Basic operation
1 Choose a TV channel with a teletext broadcast
2 Make sure to set the VCR/TV/DVD switch to the
TV position.
3 Press g g g g (Text) button to display the teletext
Pressing g (Text) button changes the mode as follows:
4 Choose a teletext page by pressing the p p p p p p p p
buttons, Number buttons or Colour buttons
To return to the TV mode:
Press the b button or g (Text) button.
• If you have trouble receiving teletext broadcasts,
consult your local dealer or the teletext station.
• The ZOOM function will not operate in the TV and
text mode or Text mode.
• No menu operations are possible when viewing a
teletext programme.
• Language display depends on the country which was
set on the TELETEXT LANGUAGE menu. If
characters on a Teletext programme do not appear
properly, change the TELETEXT LANGUAGE
Setting to other country’s. For detail, “Changing the
TELETEXT LANGUAGE setting” on page 32.
When viewing a teletext programme, the text
periodically moves a little at a time towards either the
top or bottom of the screen. This is to prevent burn-in
and is not a malfunction.
Using the List Mode
You can store the numbers of your favourite teletext pages
in memory and call them up quickly using the colour
buttons.
„ To store the page numbers:
1 Press B B B B button to engage the List mode
The stored page numbers are displayed at the bottom of
the screen.
2 Press a Colour button to choose a position.
Then press the Number buttons to enter the
page number
3 Press and hold down A A A A (Store) button
The four page numbers blink white to indicate that they
are stored in memory.
„ To call up a stored page:
1 Press the B B B B button to engage the List mode
2 Press a colour button to which a page has been
assigned
To exit the List mode:
Press the B button again.
Hold
You can hold a teletext page on the screen for as long as
you want, even while several other teletext pages are being
received.
Press the C C C C (Hold) button
To cancel the Hold function:
Press C (Hold) button again.
• The Hold function is cleared if no operation is performed
for approximately one minute.
TEXT ---
TEXT ---
D1043
TEXT ---
TEXT ---
TV mode TV and text mode
Text mode
Hold indication
PD-42DV2_Eng.book Page 18 Friday, October 17, 2003 11:43 AM