Monitor set, Initial settings, Monitor type – JVC SR-DVM700E User Manual
Page 19
Masterpage:Right+
EN
19
Filename [DVM700EU_05Name.fm]
INITIAL SETTINGS
Page 19
Monday, 13 March 2006 15:07
You can select the monitor type depending on the TV used when
you play back DVD VIDEO discs recorded for wide-screen TVs.
1
Press DVD so that the DVD lamp lights up on the unit.
2
Press SET UP to access the Main Menu screen.
●
You cannot set the monitor type during recording or playback.
3
Press selection keys to select
AFUNCTION SET UPB, then
press
G.
4
Press selection keys to select
AVIDEO IN/OUTB, then press
G.
5
Press selection keys to select
AMONITOR TYPEB, then
press ENTER.
6
Press selection keys to select
the desired option, then press
ENTER.
7
Press SET UP to complete the setting.
* The boldface settings below indicate the settings at your purchase.
8
MONITOR TYPE
-
4:3LB
/ 4:3PS / 16:9AUTO / 16:9FIX
4:3LB
(Letter Box conversion):
Select this when the aspect ratio of your TV is 4:3 (conventional
TV). While viewing a wide screen picture, the black bars appear
on the top and the bottom of the screen.
4:3PS
(Pan&Scan):
Select this when the aspect ratio of your TV is 4:3 (conventional
TV). While viewing a wide screen picture, the black bars do not
appear; however, the left and right edges of the pictures will not
be shown on the screen.
16:9AUTO
(Wide television conversion):
Select this when the aspect ratio of your TV is 16:9 (wide TV).
16:9FIX
(Wide television conversion):
Select this when the aspect ratio of your TV is fixed to 16:9
(wide TV). The unit automatically adjusts the screen width of
the output signal correctly when playing back a picture whose
aspect ratio is 4:3.
Pan&Scan/Letter Box
In general, DVD VIDEO disc are produced for a wide-screen TV
with 16:9 aspect ratio.
Material with this ratio will not fit to a TV with 4:3 aspect ratio.
There are two styles to display the image,
APan&ScanB (PS) and
ALetter BoxB (LB).
Pan&Scan
The right and left side of the image are cut off.
The image fills the screen.
●
The picture will be shown in the
A4:3LBB
mode depending on the disc even if the
A4:3PSB mode is selected.
Letter Box
Black bands appear at the top and bottom of
the image. The image itself appears in 16:9
aspect ratio.
Monitor Set
●
Turn on the unit.
●
Turn on the TV and select the AV mode.
●
Slide the TV/DVD switch to DVD.
FGDE
ENTER
SET UP
DVD
DVD
TV
Selection Keys
ENTER
SELECT
SET UP
EXIT
DVD VIDEO SET UP
MONITOR TYPE
HDD/DVD SET UP
FUNCTION SET UP
INITIAL SET UP
REC/PLAY SET UP
DISPLAY SET
F-1 INPUT
L-1 INPUT
VIDEO IN/OUT
VIDEO
VIDEO
4:3LB
SELECT WITH @
PRESS [SET UP] TO EXIT
THEN PRESS [ENTER]
DVM700EU_00.book Page 19 Monday, March 13, 2006 3:07 PM