Jacuzzi SteamPro - Manual (Page 7)

INSTALLATION
STEAM UNIT TO BE LEVEL AND UPRIGHT SEE
PAGE 5 FOR SUGGESTED LOCATIONS
WATER SUPPLY
WITH SHUT-OFF
VALVE (3/8 OR 1/2
INCH COPPER)
TO STEAM HEAD SEE
PAGES 8 AND 9 FOR STEAM
HEAD PLUMBING AND
INSTALLATION FOR VARI-
OUS WALL SURFACES.
STEAM PIPE 1/2 INCH
(MINIMUM SIZE) COPPER.
25 FOOT TOTAL MAXIMUM
RUN. DO NOT PLACE ANY
VALVES OR DIPS IN THIS
LINE. PIPE INSULATION
RECOMMENDED
*SHOWN WITH OPTIONAL
AUTOMATIC DRAIN VALVE
(SEE PAGE 10)
TANK DRAIN LINE. INSTALL
SITE DRAIN OR OTHER
DRAINAGE METHOD AS
REQUIRED BY LOCAL
CODES (WITH AUTOMATIC
DRAIN OPTION, WATER
DISCHARGED IS LESS THAN
14
0° F).
MANUAL TANK DRAIN VALVE.
LOCATE IN AN AREA EASILY
ACCESSIBLE TO ALLOW
FREQUENT DRAINING.
1/2 INCH MINIMUM
COPPER
NOTE: ALL COPPER PIPE
SIZES ARE TO BE INDUSTRY
NOMINAL SIZES. PLUMBING
AND FITTINGS ARE NOT
PROVIDED UNLESS NOTED
OTHERWISE.
*TANK DRAIN WITH MANUAL
VALVE (MANUAL DRAIN VALVE
IS PROVIDED WITH STEAM
GENERATOR)
PRESSURE RELIEF VALVE 3/4 NPT
(PROVIDED WITH STEAM GENERATOR)
REDUCTION FROM 3/4 NPT TO 1/2 NPT
PERMITTED
PRESSURE RELIEF VALVE DRAIN LINE.
DRAIN LOCATION AND METHOD AS
REQUIRED BY LOCAL CODES. (TO BE
1/2 INCH MINIMUM SIZE COPPER)
Plumbing Diagram
SteamPr
o
SEE CHART ON
PAGE 4 FOR
REQUIRED
WIRE SIZE.
5