JVC VN-V686UAPI - Manual (Page 99)

number for data plus one is the port number for control.
Allowed user admin, operator
7. List of Protocols and Port Numbers Used with VN-V686
VN-V686 uses the following protocols and port numbers.
Protocol / Port Number Use
TCP 80 WEB setting page, API for Getting status and changing
settings, acquisition of JPEG from VN-V686 by client
UDP 80 Search for VN-V686
TCP 20, 21 FTP
TCP 25 SMTP (Mail by Alarm Action)
TCP 110 POP (Mail by Alarm Action)
UDP 123 SNTP
TCP 10020, 10021, 10023 reserved for internal use
TCP User Setting Alarm on TCP
UDP User Setting Alarm on UDP
UDP User Setting Multicast Streaming
8. Customizing VN-V686's Built-in Viewer
The built-in JPEG/MPEG-4 viewer of VN-V686 consists of an ActiveX control. The ActiveX is available for
customized viewer.
8.1. Properties of ActiveX
- RcvMode 0 for TCP, 1 for multicast
- IP IP Address of VN-V686 in case of TCP
- HttpPort Port Number of VN-V686 in case of TCP
- MultiIP IP Address of multicast
- MultiPort Port Number of multicast
- DispWidth Width of Display
- DispHeight Height of Display
- FrameRate Frame Rate of JPEG (MPEG-4 viewer does not have this property.)
Specify 30, 25, 15, 10, 7.5, 6, 5, 3, 2, 1, -2, -3, -5, -10, -15, -20, or -30. -5 means 1/5fps for example.
- DispTitle Set 1 to display Camera ID
- DispPosTitle Set 1 to display position title (JPEG viewer only. Operator password is required for displaying
position title.)
- DispTimeCode Set 1 to display Time
99