JVC KD-AR8500 - Manual (Page 56)

56
ENGLISH
Symptoms Causes Remedies
Sounds
• DSP mode cannot be
selected other modes than
“Defeat.”
Crossover network is
activated. Deactivate crossover network
(see page 28).
• Only high range sound
or low range sound
is reproduced though
full range speakers are
connected.
Crossover network is
activated. Deactivate crossover network
(see page 28).
Graphics
• Download does not seem to
finish.
It takes quite a long time to
download an animation of
many frames (see page 53).
PICT—PSM
• The display graphic
function does not work
correctly.
Temperature in the car
compartment is very low. Wait until the operating
temperature resumes.
• The display screen dims. Temperature in the car
compartment is high. Turn off the power, and
wait until the operating
temperature resumes.
• You cannot activate
“Slideshow” for “PICT”
(“No Slide” is shown as the
selectable item).
No still images are
downloaded yet. Download a still image.
CD changer
• “No Magazine” appears on
the display.
No magazine is loaded in the
CD changer. Insert the magazine.
• “No Disc” appears on the
display.
No disc is in the magazine. Insert disc into the magazine.
Disc is inserted upside down. Insert disc correctly.
• “Reset 08” appears on the
display.
This receiver is not connected
to the CD changer correctly. Connect this receiver and the
CD changer correctly and
press the reset button of the
CD changer.
• “Reset 01” – “Reset 07”
appears on the display.
The CD player may have
functioned incorrectly. Press the reset button of the
CD changer.
• The CD changer does not
work at all.
The built-in microcomputer
may function incorrectly due
to noise, etc. Reset the receiver (see page
2).
EN54-59_KD-AR8500[J]f.indd 56 EN54-59_KD-AR8500[J]f.indd 56 05.4.11 1:07:24 PM 05.4.11 1:07:24 PM