JVC KD-AR8500 - Manual (Page 23)

23
ENGLISH
Making sound natural
To activate Compression
Compensative (CC) Converter
CC Converter eliminates jitter and ripples,
achieving a drastic reduction in digital
distortion. This processing can be applied to the
analog sources as well as the digital sources;
therefore, you can obtain a natural sound field
from any source.
1
Enter the CCC menu (see page 5).
2
Select “On.”
• When “C.C.Conv.” is turned on, the
CCC indicator is brightened in yellow
on the display (in sequence with other
indicators).
• To cancel CC Converter, select “Off.”
3
Finish the procedure.
To activate BBE Digital
BBE Digital* is a digital processing method to
restore the brilliance and clarity of the original
live sound in recording, broadcasts, etc.
When a speaker reproduces sound, it introduces
frequency-dependent phase shifting, causing
high-frequency sounds to take longer to reach
the ear than low frequency sounds. BBE Digital
adjusts the phase relationship between the
low, mid and high frequencies by adding a
progressively longer delay time to the low and
mid frequencies, so that all frequencies reach
the listener’s ears at the proper time.
1
Enter the BBE menu (see page 5).
2
Select the effect level.
Ex.: When “1” is selected
• As the number gets higher, the effect
level becomes stronger. When “BBE”
is turned on, the BBE indicator is
brightened in green (with its current level)
on the display (in sequence with other
indicators).
• To cancel BBE Digital, select “Off.”
3
Finish the procedure.
* Manufactured under license from BBE Sound,
Inc.
Licensed by BBE Sound, Inc. under USP5510752
and 5736897. BBE and BBE symbol are
registered trademarks of BBE Sound, Inc.
On
Off
Off 1
2 3
EN21-27_KD-AR8500[J]f.indd 23 EN21-27_KD-AR8500[J]f.indd 23 05.4.8 2:32:31 PM 05.4.8 2:32:31 PM