Installing the projector – JVC DLA-HX2E User Manual
Page 18
18
When the remote control unit fails to work properly
•
When the batteries in the remote control unit are exhausted, improper functioning will occur. Please replace with new
batteries.
•
When either the remote control unit or projector alone is connected to the remote cable, the item connected will not be
able to work. Please check the cable connection.
•
When a remote cable is connected to the projector, the supplied remote control becomes inoperable.
When operating via the supplied remote control, confirm that the cable is not connected to the projector.
The operable distance of the remote control unit is about 7 m for direct reception. The remote control unit can be used by having
the transmission signal reflected off a screen. In this case, please set the total distance A + B where A is the distance from
projector to screen and B is the distance from screen to remote control, within 7 m. The operable angles of the remote
control unit are 30˚ right and left, and 20˚ up and down.
• As the effect of signals reflected from the remote control
unit differ with the type of screen used, effective range
and distance may decrease.
By connecting a separately sold wired remote control via remote cable to the [REMOTE] terminal, the remote control can be
used as a wired control unit.
• When connected to the remote cable, the supplied remote control’s transmitter and the projector’s sensor do not function.
• Please keep within the range of the remote cable length. Warranty is not extended to the case where an extension cord is
used.
Installing the Projector
QU
IC
K A
LIG
N.
PC
VID
EO
VO
LU
ME
PR
ES
ET
HID
E
ME
NU
EX
IT
FR
EE
ZE
OPE
RA
TE
V-K
EYSTON
E
H-KEYS
TONE
SC
RE
EN
DIG
IT
AL
ZO
OM
FOCUS
W
S
EN
TER
20˚
20˚
30˚
A
B
30˚
Q
UICK ALIGN.
PC
VIDEO
VO
LU
ME
PRES
ET
HIDE
MENU
EXIT
FRE
EZE
OP
ER
ATE
V-KE
YST
ONE
H-K
EYS
TON
E
SC
RE
EN
DIG
IT
AL
ZO
O
M
FO
CU
S
W
S
ENT
ER
30˚
20˚
20˚
30˚
QUICK
ALIGN.
PC
VIDEO
DIGITAL
ZOOM
HIDE
VOLUME
PRESET
ESCAPE
ENTER
MENU
FREEZE
OPERATE
REMOTE
RS-232C OUT
CONTROL
Ⅵ Using as a wireless remote control unit
Ⅵ Using as a wired Remote Control
Screen
Projector
Projector
Remote Control Sensor
(rear)
Remote Control Unit
Remote Control Unit
• Aim the remote control unit towards the remote
sensor on the front or rear of the projector. The
operable distance of the remote control unit is
about 7 m for direct reception. If the remote
control fails to work properly, move closer to
the projector.
• If the fluorescent lamp is lit, the remote control
unit might not function properly.
❈ The [ESCAPE] button on the separately sold remote control (RM-M3010) is equivalent
to the [EXIT] button on the supplied remote control unit. There is no equivalent to the [H-
KEYSTONE], [V-KEYSTONE] and [FOCUS] buttons found on the supplied remote con-
trol.
Remote Cable (sold separately)
QAM0081-001 (approx. 3 m)
QAM0247-001 (approx. 15 m)
Projector
Wired remote
control
(sold separately)
RM-M3010
Effective Range and Distance of the Remote Control Unit