Controls, indicators and connectors – JVC GV-PT2 User Manual
Page 9

8
EN
CONTROLS, INDICATORS AND CONNECTORS
Front View
1
PRINT button
2
MEMORY button
• Press to store an input image for printing.
3
STANDBY/ON
button
• Turns the printer on and off.
4
SOURCE/ON LINE button
5
FRAME STABILISER
6
Vent holes
• Periodically clean these holes with a
vacuum cleaner. Make sure the printer’s
power cord is unplugged.
7
ERROR lamp
8
INK lamp
• Lights when the ink cassette is loaded.
9
ON LINE lamp
• Lights when the PC mode is on.
0
Remote Control Signal Receiver
!
REMOTE PAUSE connector
• Used when printing snapshots or an
editing index from a JVC camcorder or
video cassette recorder. Connect a
commercially available ø3.5mm mini
plug to either the camcorder’s editing
jack or the video cassette recorder’s
R.A.EDIT jack.
@
S-Video Input Connector
• If the source unit has an S-Video output
jack, connect it to the digital video
printer using a commercially available S-
Video cable. S-VHS input has priority
over normal inputs.
#
Video Input Connector
• If the source unit doesn’t have an S-
Video output jack, connect its normal
video output to the printer using a
commercially available video cable.
$
Paper Tray Insertion Slot
• Insert the paper tray into this slot.
%
Output Tray
• Printed sheets are stacked here.
* Be sure to open the tray when using the
printer.
^
Ink Cassette Insertion Slot
• Open this to load or unload the ink
cassette.
1 2 3 4 5
7
8
9
0
6
! @ #
$
%
^