JVC GV-PT2 User Manual

Page 44

REWIND THE TAPE IN THE
CAMCORDER TO THE SCENE YOU
WANT TO PRINT, THEN PAUSE THE
TAPE

PRESS MODE

•MODE SELECT MENU appears.
•If the image to be printed is not stored in

memory, “CAPTURE” is not displayed on the
MODE SELECT MENU.

SELECT SNAP SHOT PRINTING

Press cursor buttons

and place the

pointer

੬ on SNAP SHOT PRINTING.

PRESS OK

•MODE SELECT MENU disappears and SNAP

SHOT PRINTING appears.

PRESS THE CAMCORDER’S SNAP
SHOT BUTTON

•Refer to the camcorder’s instruction manual

for details.

•The camcorder automatically locates the

beginning of the snapshot, and the printer
stores the scene.

•When the number of scenes set in

2 is

stored, the MEMORY display is entered.

•If you do not want to store all the 16 scenes,

press OK. The MEMORY display is entered
with the rest of the scenes turning white.

•When the MEMORY display appears, stop

the snapshot search on the camcorder.

•If you have chosen 4 or 16 of the same

scene, the MEMORY displays only one
scene.

•Title Impose Print is not available.

PRESS PRINT

•Print Lamp blinks, indicating that printing

has started.

•“Now printing!!” appears on screen during

printing.

•When the printed sheets are delivered to the

output tray and “Now printing!!” disappears,
printing is complete. Do not leave more
than 25 printed sheets stacked on the tray.

MODE SELECT MENU

CAPTURE
EDITING INDEX

੬

SNAP SHOT PRINTING

ENTER THE MODE [OK]
SELECT [ / ]
QUIT [MODE]

To exit Snapshot Print mode ...,
press MODE after printing. The SNAP
SHOT PRINTING disappears.
If you do not want to store the preset
number of scenes ...,
press OK during storing. The MEMORY
display appears and the rest of the
scenes turn white.
FRAME STABILISER
ON/OFF switching of the frame
stabiliser is available only for one-scene
snapshot printing.
If the contour line is indented, press
FRAME STABILISER button to call up
“F.STABILISER” on TV screen.
If Snap Shot Print does not work ...,
see page 12 or 13 and make sure that
the mini plug cord is correctly
connected.
If the source tape contains snapshots
taken in Motor Drive mode ...,
you cannot print these snapshots using
Snapshot Print. Exit Snap Shot Print
mode and store the image with MULTI
set to 4 or 16 and CONTENT set to
DIFFERENT (on page 24).