Troubleshooting (cont.) – JVC GV-PT2 User Manual

Page 69

TROUBLESHOOTING (cont.)

Check to see if

power won’t turn on

Error lamp lights (or
blinks)

paper is jammed

two or more stacked
sheets have printed

the image you want
to print from the
playback unit
cannot be called up
on screen.

the image on the TV
screen won’t change
or the stored image
has disappeared.

colour is weak or
wrong.

the image to be
printed is expanded
vertically or black
bars appear at the
top and bottom of
the image.

the top of the
printed image is not
straight.

ⅷ power cord is unplugged.
ⅷ any message appears on the screen. If a message

appears, take the appropriate action as indicated
on pages 64 to 67. If no message appears, turn the
power off, unplug the cord and wait several
minutes. Then plug the cord back in and turn the
power on again.

ⅷ paper jam may be due to:

•incompatibility of paper with ink cassette
•wrong paper orientation
•the printer set upright or tilted

ⅷ remove paper as directed on page 69.
ⅷ blank paper sheets have been properly shuffled. If

not, shuffle them thoroughly to separate each sheet
before placing them on the paper tray.

ⅷ video cable is correctly connected.

ⅷ input select switch of TV is set to VIDEO (EXT.IN).

ⅷ input connector priority has been observed.

ⅷ MEMORY mode has been entered. If so, press the

SOURCE button.

ⅷ the power has been turned off. The stored image

disappears when the power is turned off. Store the
image in memory again.

ⅷ colours are generally acceptable. The colours on the

TV screen may be somewhat different from those
actually printed, which is normal with this Printer.

ⅷ you are making multiple prints of images recorded

in “SQUEEZE” or “CINEMA” mode.
In this mode,
•SQUEEZE mode is engaged. If so, the image is

stretched vertically.

•CINEMA mode is engaged. If so, black bars will

appear at the top and bottom of the image.

ⅷ you have printed a playback image from a tape

recorded on another VCR. If so, the top zone of the
image may not be straight. This is normal with this
printer.

—

Page

OTHER PROBLEMS: