Jensen NAV101 - Manual (Page 8)

4
NAV101
UP
DATA BUS ANTENNA RESET
N
S
E W
NAV101
Mobile Navigation
Jensen VM9412/VM9512
GPS Antenna
SD
CARD
Jensen VM9022
SMB
NAV Bus
Secure Smartbus Cable
with 11mm (.4in) Screw
Connections
1. Insert one end of the Smartbus cable into the “DATA BUS” slot on the side of the NAV101
and secure it with a 11mm (.4in) screw (provided). Connect the other end of the cable to
the NAV101 input on the back of your Jensen navigation-ready head unit (VM9412,
VM9512, VM9022). If using a VM9412 or VM9512, secure the cable to the radio using a
11mm (.4in) screw. The VM9022 has a cable to cable connection and does not require an
anchor screw.
2. Attach the GPS Antenna to the “ANTENNA” jack on the side of the NAV101.
3. Insert SD card into the SD card slot and gently press the card in against the spring latch
until it stops, then release. The card will "lock" firmly into place inside the SD card slot.