JVC TK-C215VP4U/E - Manual (Page 31)

31
Note:
● Make sure that the dome cover is firmly
fastened.
Otherwise, the humidity level may rise, which
may result in fogging and even falling of the
cover.
● Ensure that the fall prevention wire of the
dome cover is not caught in the space
between the dome cover and base. Failing to
do so may cause the dust-proof and water-
proof features to malfunction.
Mounting the base to the electrical box.
1.
Setting the switches ( A Pg. 20)
2.
Removing the camera unit from the base
( A Pg. 21)
3.
Mounting the base to the electrical box
Mount the base to the electrical box by using the
2 mounting holes and 2 M4 screws.
Memo:
● M4 screws are not supplied with this product.
4.
The following procedures are same as
normal mounting
● Cable Connection (A Pg. 22)
● Mounting the camera unit to the base
● (A Pg. 23)
● Adjusting Images (A Pg. 25)
● Mounting the inner dome (A Pg. 30)
● Mounting the dome cover (A Pg. 30)
Mounting the camera using
the electrical box
4 Inch square electrical box
M4 Screw
Base
TK-C215VP4_JP.book Page 31 Thursday, November 2, 2006 10:51 AM