Channel summary, Initial setup, Channel guard message channel summary – JVC TM-2703U User Manual
Page 18

When a viewer attempts to watch a guarded channel, the following message appears:
To watch a channel that you have locked, enter the Lock
Code using the 10 key pad.
If the wrong code is entered, the message
“INVALID LOCK CODE!” will flash on the screen:
The channel cannot be accessed until the correct code
is entered.
• Once a channel has been unlocked, it will remain unlocked until the television is turned off.
• See also “Set Lock Code”, page 25.
Initial Setup
18
Channel Guard Message
Channel Summary
Channel summary allows you to customize the line-up of channels received by your TV. You
can add or delete channels from the line-up or prevent any unauthorized viewers from watching
any or all 181 channels.
Press the M
ENU
button
π†
To CHANNEL SUMMARY
è
To operate
The Channel summary screen will now be displayed with
the channels set to scan marked with an “¸”. You can
delete channels from the scan by removing the “¸”. If any
channels were missed during auto tuner setup and you
wish to add them, you may by placing an “¸” next to the
channel number.
π†
To the SCAN column
è
To include or delete from scan
Press the E
XIT
button when finished
You can block access to a channel by activating the channel lock.
Press the M
ENU
button
π†
To CHANNEL SUMMARY
è
To operate
π†
To the Lock Column ( )
Press the Z
ERO
button to lock or unlock that channel
Press the E
XIT
button when finished
� � � � � � � � � � � � �
�
� � � � � � � � � � � � � � �
�
�
�
�
�
�
�
�
�
� �
� � � � � � �
� � � �
� � � � � � � � � � �
� � � � � � � � � �
�
� �
� �
� �
� �
�
� � � � � � � � �
�
� �
� � � � � � � � � �
�������������������������
��������������
�������������������������
������������������������
�������������������
���������������������������������
TM2703U
5/27/03, 9:11 AM
18