JVC KD-AV7010 - Manual (Page 80)

80
ENGLISH
Disc playback—MP3
• Disc cannot be played back.
] MP3 tracks do not have the extension
code—<.mp3>.
] MP3 tracks are not recorded in the format
compliant with ISO 9660 Level 1, ISO
9660 Level 2, Romeo, or Joliet.
• Noise is generated.
] The current track is not an MP3 file
(although it has the extension code—
<.mp3>).
• Elapsed playing time is not correct.
] This sometimes occurs during play. This
is caused by how the tracks are recorded
on the disc.
• Correct characters are not displayed.
] This unit can only display a limited
number of special characters (see the
tables on page 53).
Initial setup—AUDIO MENU/PSM
• “SPEAKER SIZE” settings change.
] Speaker size settings are very much
related to one another. For example, if you
set the FRONT speakers to “NONE,” you
cannot select “NONE” for the REAR
speakers.
• Rear view does not appear when you
change the gear lever to the back position.
] “BACK GEAR” is to “OFF.” In this case,
you have to select “AV2” for the source to
watch the rear view.
] “BACK GEAR” is to “AUTO,” but the
back gear wire is not connected to the
back lamp. To check whether the wiring is
correctly done or not, see page 46.
TV tuner operations
• TV tuner unit does not work at all.
] Press the reset button of the TV tuner unit.
• “TV IS NOT CONNECTED” appears on
the monitor.
] TV tuner unit is disconnected. Connect it
again.
• Auto Memory does not work.
] Signals are too weak. Store TV stations
manually.
• The TV’s main power does not shut off
automatically when you change the source
from TV to another.
] TV is connected to the TV tuner unit.
Connect it to the hideaway unit.
Remember that audio/video signals are
always transmitted to the TV while it is
on.
• “RESET 8” appears on the display of the
main unit.
] This unit is not connected to a TV tuner
unit correctly. Connect this unit and the
TV tuner unit correctly and press the reset
button of the TV tuner unit.
73-85_KD-AV7010[J]f.p65 2/14/05, 2:31 PM 80