JVC KD-AV7010 - Manual (Page 77)

77
ENGLISH
○ ○ ○ ○ ○ ○ ○ ○ ○
Monitor Adjustments
• You may not able to adjust the brightness in
the following case:
– You cannot make it brighter when the
ambient light is very bright.
– You cannot make it darker when the
ambient light is very dark.
○ ○ ○ ○ ○ ○ ○ ○ ○
Initial Setup—DVD MENU
MENU/AUDIO/SUBTITLE LANGUAGE
• When the language you have selected is not
recorded on a disc, the original language is
automatically used as the initial language. In
addition, for some discs, the initial languages
settings will not work as you set due to their
internal disc programming.
• Language setting change cannot be effective
while playing (or pausing). After you change
the language setting, eject the disc and insert
it (or another disc) again so that your setting
takes effect.
MONITOR TYPE
• When you select “16:9 NORMAL” for a
picture whose aspect ratio is 4:3, the picture
slightly changes due to the process for
converting the picture width.
• Even if “4:3 PS” is selected, the screen size
may become “4:3 LB” with some DVDs.
This depends on how they are recorded.
○ ○ ○ ○ ○ ○ ○ ○ ○
Dual Mode Operations
Adjusting AV OUTPUT volume
• This adjustment does not affect the volume
level of the monitor inserted into the optional
cradle (KV-CR100).
○ ○ ○ ○ ○ ○ ○ ○ ○
Surround Mode Operations
• Dolby Digital disc is not always encoded as
multi-channel source. If it is not multi-
channel encoded, “Dolby Digital” cannot be
selected for surround mode.
○ ○ ○ ○ ○ ○ ○ ○ ○
Sound Mode (iEQ) Operations
• If you do not want to store your current
adjustment, but only to apply the adjustment
to the current playback source, press
RETURN on the monitor screen to go back to
the operation screen of the current source.
Adjustment you made remains effective until
you select a sound mode.
○ ○ ○ ○ ○ ○ ○ ○ ○
Other Sound Adjustments
• If fader or balance has been set close to its
extreme, appropriate surround/DSP effect
may not be obtained.
• If you are using a two-speaker system, set the
fader level to “0.”
• You cannot adjust the input level—Volume
Adjustment—of the FM stations. If the
source is FM, Volume Adjustment will not be
used.
73-85_KD-AV7010[J]f.p65 2/14/05, 2:31 PM 77