JVC RX-6008VBK - Manual (Page 9)

6
English
RIGHT LEFT
AUDIO
VCR
IN
(PLAY)
OUT
(REC)
CD
PHONO
TV SOUND
/DBS
TAPE
/MD
IN
(PLAY)
OUT
(REC)
DIGITAL 2 (CD)
DIGITAL 1
(DVD)
PCM / DOLBY DIGITAL
/ DTS
DIGITAL IN
VIDEO
VIDEO
S-VIDEO
MONITOR
OUT
VCR
IN
(PLAY)
OUT
(REC)
DBS
DVD
RIGHT LEFT
AUDIO
DVD
A
B D
C
RIGHT
RIGHT LEFT
AUDIO
VCR
IN
(PLAY)
OUT
(REC)
CD
PHONO
TV SOUND
/DBS
TAPE
/MD
IN
(PLAY)
OUT
(REC)
DIGITAL 2 (CD)
DIGITAL 1
(DVD)
PCM / DOLBY DIGITAL
/ DTS
DIGITAL IN
VIDEO
VIDEO
S-VIDEO
MONITOR
OUT
VCR
IN
(PLAY)
OUT
(REC)
DBS
DVD
RIGHT LEFT
AUDIO
DVD
Video component connections
Use the cables with RCA pin plugs (not supplied).
Connect the white plug to the audio left jack, the red plug to the
audio right jack, and the yellow plug to the video jack.
Note:
When connecting the DBS tuner to the TV SOUND/DBS jacks,
change the source name, which will be shown on the display when
selected as the source, to “DBS.” See page 11 for details.
If your audio components have an AV COMPU LINK terminal
See also page 27 for detailed information about the connection and
the AV COMPU LINK remote control system.
DBS
RIGHT LEFT
AUDIO
VCR
IN
(PLAY)
OUT
(REC)
CD
PHONO
TV SOUND
/DBS
TAPE
/MD
IN
(PLAY)
OUT
(REC)
DIGITAL 2 (CD)
DIGITAL 1
(DVD)
PCM / DOLBY DIGITAL
/ DTS
DIGITAL IN
VIDEO
VIDEO
S-VIDEO
MONITOR
OUT
VCR
IN
(PLAY)
OUT
(REC)
DBS
DVD
RIGHT LEFT
AUDIO
DVD
To composite video output
DBS tuner
To audio
output
To composite video input
Connect the TV to the MONITOR
OUT jack to view the playback
picture from the other connected
video components.
To audio
output
To S-video input (for better
playback picture quality)
TV
When connecting the TV to the TV SOUND/DBS jacks, DO NOT
connect the TV’s video output to the video input terminal.
Å To left/right channel audio output
ı To left/right channel audio input
Ç To composite video output
Î To composite video input
DVD player
IMPORTANT:
This receiver is equipped with both the composite video and S-video
input terminals for the DVD player connection.
You do not have to connect both the composite video and S-video
terminals.
However, remember that the video signals from the composite
video input terminal are output only through the composite
video output terminals, while the ones from the S-video input
terminal are output only through the S-video output terminal.
Therefore, if your DVD player is connected to the receiver only
through the S-video input terminal, you cannot record the picture
from the DVD player on the VCR.
In addition, if the TV and the DVD player are connected to the
receiver through the different video terminals, you cannot view the
playback picture from the DVD player on the TV.
VCR
Å To front left/right channel audio output (or to audio mixed
output if necessary)
ı To composite video output
Ç To S-video output (for better playback picture quality)
DVD
A C
VIDEO
VIDEO
S-VIDEO
MONITOR
OUT
VCR
IN
(PLAY)
OUT
(REC)
DBS
DVD
RIGHT LEFT
AUDIO
DVD
B
TV and/or DBS tuner
DVD player
VCR
EN01-07.RX-6000V[J] 99.12.14, 4:02 PM 6