JVC RX-6008VBK - Manual (Page 27)

24
English
On the front panel:
You can also use the buttons on the front panel to adjust the
Surround modes. However, no test tone is available when using the
buttons on the front panel. So, make adjustments while listening to
the sound of the source played back.
1. Press DSP MODE repeatedly until
“THEATER” appears on the
display.
• The Ÿ PRO LOGIC and DSP indicators
also light up on the display.
2. Adjust the speaker output levels.
1) Press ADJUST repeatedly until one of
the following indications appears on
the display.
“CENTER LEVEL”:
To adjust the center speaker level.
“REAR L LEVEL”:
To adjust the left rear speaker level.
“REAR R LEVEL”:
To adjust the right rear speaker level.
• Once you have pressed ADJUST,
MULTI CURSOR % / fi can be also
used for selecting the speaker.
2) Press MULTI CURSOR @ / # to
adjust the selected speaker output
level (from –10 dB to +10 dB).
3) Repeat 1) and 2) to adjust the other
speaker output levels.
4. Adjust the effect level.
1) Press ADJUST repeatedly until “DSP
EFFECT” appears on the display.
• Once you have pressed ADJUST,
MULTI CURSOR % / fi also can be
used for selecting “DSP EFFECT.”
• The display changes to show the
current setting.
2) Press MULTI CURSOR @ / # to
select the effect level.
• As you press it, the effect level changes
as follows:
As the number increases, JVC Theater Surround becomes
stronger.
4. Adjust the speaker output levels.
• To adjust the center speaker level, press
CENTER –/+ (from –10 dB to +10 dB).
• To adjust the left rear speaker level, press
REAR•L –/+ (from –10 dB to +10 dB).
• To adjust the right rear speaker level, press
REAR•R –/+ (from –10 dB to +10 dB). DSP MODE
ADJUST
MULTI CURSOR
ADJUST
DSP EFFECT 1 DSP EFFECT 2 DSP EFFECT 3
DSP EFFECT 4 DSP EFFECT 5
MULTI CURSOR
5. Press TEST again to stop the test tone.
6. Press EFFECT to select an effect
level you want.
• Each time you press the button, the effect
level changes as follows:
As the number increases, JVC Theater Surround becomes
stronger.
MENU
9 8
– REAR•L +
6 5
– CENTER +
+10 10
– REAR•R +
ENTER
DSP EFFECT 1 DSP EFFECT 2 DSP EFFECT 3
DSP EFFECT 4 DSP EFFECT 5
1
TEST
4
EFFECT
EN18_25.RX-6000V[J] 99.12.16, 1:10 PM 24