Specifications, English – JVC RX-6008VBK User Manual
Page 35
32
English
Specifications
Amplifier
Output Power
At Stereo operation:
Front channels:
100 W per channel, min. RMS, driven into 8
Ω
40 Hz to 20 kHz with no more than 0.8% total
harmonic distortion.
At Surround operation:
Front channels:
100 W per channel, min. RMS, driven into 8
Ω
at 1 kHz with no
more than 0.8% total harmonic distortion.
Center channel:
100 W, min. RMS, driven into 8
Ω
at 1 kHz, with no more than
0.8% total harmonic distortion.
Rear channels:
100 W per channel, min. RMS, driven into 8
Ω
at 1 kHz, with no
more than 0.8% total harmonic distortion.
Audio
Audio Input Sensitivity/Impedance (1 kHz):
PHONO (MM):
2.7 mV/47 k
Ω
CD, TAPE/MD, TV SOUND/DBS, VCR, DVD:
220 mV/47 k
Ω
Audio Input (DIGITAL IN)* :
Coaxial: DIGITAL 1 (DVD):
0.5 V (p-p)/75
Ω
Optical: DIGITAL 2 (CD):
–21 dBm to –15 dBm (660 nm ±30 nm)
* Corresponding to Linear PCM, Dolby Digital, and DTS Digital Surround (with
sampling frequency — 32 kHz, 44.1 kHz, 48 kHz).
Audio Output Level:
TAPE/MD, VCR:
220 mV
Signal-to-Noise Ratio (’66 IHF/’78 IHF):
PHONO:
70 dB/78 dB (at REC OUT)
CD, TAPE/MD, TV SOUND/DBS, VCR, DVD:
87 dB/80 dB
Frequency Response (8 ohms):
PHONO:
20 Hz to 20 kHz (±1 dB)
CD, TAPE/MD, TV SOUND/DBS, VCR, DVD:
20 Hz to 20 kHz (±1 dB)
RIAA Phono Equalization:
±1 dB (20 Hz to 20 kHz)
Bass Boost:
+3 dB ±1
dB at 100 Hz
Tone Control:
Bass (100 Hz):
±10 dB ±2 dB
Treble (10 kHz):
±10 dB ±2 dB
Video
Video Input Sensitivity/Impedance:
Composite video:
DBS, VCR, DVD:
1 V (p-p)/75
Ω
S-video:
DVD:
(Y: luminance):
1 V (p-p)/75
Ω
(C: chrominance, burst):
0.286 V (p-p)/75
Ω
Video Output Level:
Composite video:
VCR, MONITOR OUT:
1 V (p-p)/75
Ω
S-video:
MONITOR OUT:
(Y: luminance):
1 V (p-p)/75
Ω
(C: chrominance, burst):
0.286 V (p-p)/75
Ω
Synchronization:
Negative
Signal-to-Noise Ratio:
45 dB
EN27_33.RX-6000V[J]
99.12.14, 4:00 PM
32