JVC HR-J261EU - Manual (Page 34)

Filename [HRJ261EU3.fm]
Masterpage:Left
34
EN SUBSIDIARY SETTINGS (cont.)
Manual Channel Set
Store channels that were not stored during Auto Set Up
(
੬
pg. 8), Preset Download (
੬
pg. 10) or Auto Channel Set
(
੬
pg. 32).
A
Access the Main Menu screen.
Press MENU.
B
Access the Confirmation screen.
Press rt to move the highlight bar (pointer) to
“MANUAL CH SET”, then press OK or e . The
Confirmation screen appears.
C
Select the channel position.
Press rt w e until an open
position in which you want to
store a channel begins blinking,
then press OK. The Manual
Channel Set screen appears.
D
Select the band.
E
Input the channel.
Press the NUMBER keys to input the channel number you
want to store.
● Input “0” before any single number entries.
● To input the registered station name (ID – ੬
pg. 37), press e
until “– – – –” (ID setting) begins blinking, then press
rt
.
● For fine tuning adjustment, press e until “+/–” begins blinking,
then press
rt
. While tuning, “+” or “–” appears.
F
Enter new channel information.
Press OK and the Confirmation screen appears.
● Repeat steps 3 – 6 as necessary.
G
Close the Confirmation screen.
Press MENU.
● To change positions, see “Change Station Channel Position”
(
੬
pg. 35).
● If you wish to set station names other than the ones registered
in your recorder, see “Set Stations (B)” (
੬
pg. 36).
The blueback screen and the
programme currently being
broadcast by the selected
channel appear alternately for 8
seconds each.
(Example) To store in position 12.
Press rt to change the band
between CH (regular) and CC
(cable), then press
e .
HRJ261EU3.fm Page 34 Wednesday, February 9, 2000 5:35 PM