beautypg.com

JVC HR-J261EU User Manual

Page 33

background image

Filename [HRJ261EU3.fm]

Masterpage:Right

EN

33

NOTES:

Fine tuning is performed automatically during Auto Channel

Set. If you want to perform it manually, refer to page 35.

If you perform Auto Channel Set when the aerial cable is not

connected properly, “SCAN COMPLETED -NO SIGNAL-”
appears on the TV screen in step 7. When this happens, make
sure of the aerial connection and press OK; Auto Channel Set
will take place again.

If no sound accompanies the picture or the audio sounds

unnatural on some channels that have been stored by Auto Set
Up, the TV system setting for those channels may be incorrect.
Select the appropriate TV system for those channels
(

pg. 35, “INFORMATION”).

F

Perform Auto Channel Set.

Press OK twice.

● If you have connected the

recorder and your TV via AV
connection (

pg. 7), the

recorder automatically
performs the Preset
Download and the T-V LINK
screen will appear
(

pg. 10).

● The Auto Set screen appears,

and remains on screen while
the recorder searches for
receivable stations.
As Auto Channel Set progresses, the “

q

“ mark on the TV screen

moves from left to right. Wait until the TV screen as shown in
step 7 appears.

G

View the Confirmation screen.

After “SCAN COMPLETED” is
displayed on the TV screen for
about 5 seconds, the
Confirmation screen looking
like the one to the right
appears. The stations your
recorder located appear on a
Confirmation screen —
channel positions (PR) and
channels (CH). The blueback screen and the programme
currently being broadcast by the blinking station appear
alternately for 8 seconds each. To view the next page, use
the

rt

w

e

button on the remote control.

● The stations located in the selected country appear at the top

of the list.

H

Return to the normal screen.

Press MENU.

● Using the Confirmation screen, you can skip or add channel

positions, enter station names and perform other operations.
Refer to pages 34 – 37 for the procedures.

IMPORTANT

Your video recorder memorizes all detected stations even if
reception of some of them is poor. You can delete those
stations with an unacceptable picture (

pg. 35, “Delete A

Channel”).

Beginning

End

HRJ261EU3.fm Page 33 Wednesday, February 9, 2000 1:09 PM