JVC HR-J261EU User Manual

Page 23

Filename [HRJ261EU2.fm]

Masterpage:Right

Enter the channel position.

Return to the normal screen.

After confirming all information is correct, press PROG or
OK. “PROGRAM COMPLETED” appears on the TV
screen for about 5 seconds, then the normal screen
appears. If “PROGRAM OVERLAPPED” appears on the
TV screen and “Err” on the front display panel, see
page 25.

● Repeat steps 1 – 6 for each additional programme.

Engage the recorder’s timer mode.

Press

(TIMER). The recorder turns off automatically

and

appears on the front display panel.

● To disengage the timer mode, press

(TIMER) again.

To Timer-Record Weekly Or Daily Serials . . .

. . . anytime during steps 2 through 6, press WEEKLY (NUMBER
key “9”) for weekly serials or DAILY (NUMBER key “8”) for daily
serials (Monday – Friday). Either “WEEKLY” or “DAILY” appears
on the TV screen. Pressing the button again makes the
corresponding indication disappear.

NOTE:

You can programme this recorder to timer-record as many as 8
programmes. If you try to programme the recorder to record a
ninth, “PROGRAM FULL” appears on the TV screen and “FULL”
appears on the front display panel. To record the extra
programme, you must first cancel any unnecessary programmes
(

੬

pg. 24).

Press PR +/–.

HRJ261EU2.fm Page 23 Friday, December 10, 1999 5:40 PM