JVC Everio GZ-HM50U - Manual (Page 8)

Inserting an SD Card
Insert a commercially available SD card before recording. (GZ-HM30)
When a commercially available SD card is inserted, recordings can still be made to the card without
stopping when the remaining recording time on the built-in memory runs out. (GZ-HM50)
* Only for GZ-HM50:
To record to the card, it is necessary to set “REC MEDIA SETTING” to “SD CARD”. (p. 9)
When no card is available, set “REC MEDIA SETTING” to “BUILT-IN MEMORY” for recording.
.
Turn off the power of this unit before
inserting or removing a card.
(Base)
Label
Insert an SD card.
Open the cover. Close the LCD monitor.
When the LCD monitor is closed, the unit turns off.
o
To remove the card
Push the card inward once, then pull it out straight.
.
(Base)
NOTE
Operations are confirmed on the following SD cards.
Manufacturer Panasonic, TOSHIBA, SanDisk, Eye-Fi*
Video A Class 4 or higher compatible SDHC card (4 GB to 32 GB) /
Class 4 or higher compatible SDXC card (Max. 64 GB)
Eye-Fi Eye-Fi Connect X2 / Eye-Fi Explore X2 / Eye-Fi Pro X2
*Only the specified models may be used. Refer to the Detailed User Guide for details.
0
Using SD cards (including SDHC/SDXC cards) other than those specified above
may result in recording failure or data loss.
0 To protect the data, do not touch the terminals of the SD card.
0 Eye-Fi manufactures SD memory cards with wireless LAN function.
8
For more information, refer to the Detailed User Guide
http://manual.jvc.co.jp/index.html/