JVC XV-501BK - Manual (Page 59)

55
Setting and adjustment
Setting the unit
DOWN MIX
By setting DOWN MIX correctly, you can
get the optimum stereo mix for your
audio system from DVD discs recorded
with Dolby Digital surround multichannel
audio.
• Lt/Rt:
You can monitor the unit’s audio
output signals via an amplifier with
built-in Dolby Pro Logic Decoder.
• L 0 /R 0 :
You can monitor the unit’s audio output signals via a TV, an amplifier with no
built-in Dolby Pro Logic Decoder, or the unit’s headphone jack. Also for
recording DVD audio output to a cassette tape, MD, etc.
PREFERENCE2 PREFERENCE1
DIGITAL AUDIO OUTPUT STREAM/PCM
DOWN MIX Lt/Rt
COMPRESSION
SCREEN SAVER
OFF
MODE1
AV COMPULINK MODE DVD1
AUTO STANDBY
PRESS KEY
OFF
COMPRESSION
You can compress the dynamic range of
the sound if you need. Using this
function, you can listen to sound in small
volume easily.
• ON
Audio is played back with the dynamic
range compressed.
• OFF
Audio is played back as it was recorded.
NOTES
● The compression function works only when playing back the disc recorded
on DOLBY DIGITAL 1 CH or 2CH. The setting is not effective on other discs.
● The compression function does not work when the 3D PHONIC function is
activated.
● The downmix function does not work when the 3D PHONIC fucntion is
activated.
PREFERENCE2 PREFERENCE1
DIGITAL AUDIO OUTPUT STREAM/PCM
DOWN MIX Lt/Rt
COMPRESSION
SCREEN SAVER
ON
MODE1
AV COMPULINK MODE DVD1
AUTO STANDBY
PRESS KEY
OFF