JBL AVR 140 - Manual (Page 7)

REAR PANEL CONNECTIONS 7
Rear Panel Connections
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
AM Antenna
FM Antenna
Tape Inputs
Tape Outputs
Subwoofer Output
DVD Audio Inputs
CD Inputs
Video 1 Audio Outputs
DMP Connector
8-Channel Direct Inputs
Digital Audio Outputs
Video Monitor Outputs
DVD Video Inputs
Front Speaker Outputs
Center Speaker Outputs
Surround Speaker Outputs
Switched AC Accessory Outlet
Unswitched AC Accessory Outlet
AC Power Cord
Video 2 Component Video Inputs
Component Video Outputs
Video 1 Component Video Inputs Video 2 Audio Inputs
Coaxial Digital Inputs
Surround Back Speaker Outputs
Video 1 Video Outputs
Video 1 Video Inputs
Optical Digital Inputs
Video 1 Audio Inputs
Video 2 Video Inputs
NOTE: To assist in making the correct connec-
tions for multichannel input/output and speaker
connections, all connection jacks and terminals
have been color coded in conformance with the
latest CEA standards as follows:
Front Left:
White
Front Right: Red
Center: Green
Surround Left: Blue
Surround Right: Gray
Surround Back Left: Brown
Surround Back Right: Tan
Subwoofer (LFE): Purple
Digital Audio: Orange
Composite Video: Yellow
Component Video “Y”: Green
Component Video “Pr”: Red
Component Video “Pb”: Blue
0 AM Antenna: Connect the AM loop antenna
supplied with the receiver to these terminals. If an
external AM antenna is used, make connections to
the AM and GND terminals in accordance with
the instructions supplied with the antenna.
1 FM Antenna: Connect the supplied indoor or
an optional external FM antenna to this terminal.
2 Tape Inputs: Connect these jacks to the
PLAY/OUT jacks of an audio recorder.
3 Tape Outputs: Connect these jacks to the
RECORD/INPUT jacks of an audio recorder.
4 Subwoofer Output: Connect this jack to
the line-level input of a powered subwoofer. If an
external subwoofer amplifier is used, connect this
jack to the subwoofer amplifier input.
5 DVD Audio Inputs: Connect these jacks to
the analog audio jacks on a DVD or other audio
or video source.
6 CD Inputs: Connect these jacks to the
analog output of a compact disc player or CD
changer or any other audio source.
7 Video 1 Audio Outputs: Connect these
jacks to the RECORD/INPUT audio jacks on
a VCR or any other Audio recorder.
8 Digital Media Player (DMP)
Connector: With the AVR 140 turned off, con-
nect one end of the optional Harman Kardon
to this proprietary connector, and the
other to your compatible Apple iPod. When the
Digital Media Player source is selected, you may
view your iPod’s control and navigation mes-
sages on your video display (if one is connected
to one of the Video Monitor Outputs
B), and
in the Upper and Lower Display Lines Ò.
You may navigate the iPod and select tracks for
playback using the
⁄ / ¤ / ‹ / › Buttons
DEa, the Set Button F and
Transport Controls
P on your AVR remote.
See page 32 for more information.
9 8-Channel Direct Inputs: These jacks are
used for connection to source devices such as
DVD-Audio or SACD players with discrete analog
outputs. Depending on the source device in use,
all eight jacks may be used, though in many
cases only connections to the front left/right,
center, surround left/right and LFE (subwoofer
input) jacks will be used for standard 5.1 audio
signals.
25339_AVR140_Eng_2 30/08/05 9:55 Side 7