JVC COMPACT VHS LYT0002-0N5A - Manual (Page 34)

34
EN
EDITING
Tape Dubbing
CONNECT EQUIPMENT
1
Following the illustration at left, connect the
camcorder and the VCR.
PREPARE FOR DUBBING
2 Set the camcorder’s Power switch to “PLAY”, turn
on the VCR’s power, and insert the appropriate
cassettes in the camcorder and the VCR.
SELECT VCR MODE
3 Engage the VCR’s AUX and Record-Pause modes.
FIND EDIT-IN POINT
4
Engage the camcorder’s Play mode to find a spot
just before the edit-in point. Once it’s reached, press
PAUSE on the camcorder.
START EDITING
5
Press PLAY on the camcorder and engage the VCR’s
Record mode.
STOP EDITING TEMPORARILY
6 Engage the VCR’s Record-Pause mode and press
PAUSE on the camcorder.
EDIT MORE SEGMENTS
7
Repeat steps 4 through 6 for additional editing, then
stop the VCR and camcorder when finished.
Power switch
If your TV/VCR
has the SCART
connector, use
the provided
cable adapter.
PLAY/PAUSE
When
connecting the
cables, open
the jack cover.
To AUDIO and
VIDEO OUT
connectors
Audio and
Video cable
(provided)
To AUDIO and
VIDEO IN
connectors
VCR
(Recording deck)