JVC VN-V685U - Manual (Page 68)

68
Format /api/param?camera.motion.zoom.status
Example of Response camera.motion.zoom.status=moving&200 OK
Interpretation Acquire current zoom status. "moving" or "stop" is returned.
Allowed users admin, operator, user
Moving Specified Position to Center for VN-V685/686/686B
Format /api/param?camera.motion.clickoncenter=X-Y
Example of Response camera.motion.clickoncenter&200 OK
Example to move (160, 120) to center (pixel)
/api/param?camera.motion.clickoncenter=s160-s120
Example to move (160, 120) to center (percentage)
/api/param?camera.motion.clickoncenter=25.00-25.00
Interpretation Moving specified position to center of image. In VN-V686 before v1.03, this API is not available. To
move to X position, specify from s0 to s639 or 0.00 to 100.00. To move to Y position, specify from s0 to s479 or 0.00 to
100.00.
Allowed users admin, operator
Getting Focus Position from VN-V685/686/686B
Format /api/param?camera.focus
Example of response camera.focus=45.00&200 OK
Interpretation Acquire current focus position. When focus is set to manual, value from 0.00 to 99.99 is returned. 0.00
means Near edge and 99.99 means Far edge. When zoom is Wide edge, focus can be from 0.00 to 99.99. When zoom
is Tele edge, focus can be from 0.00 to about 78. When focus is set to auto, easy_auto is returned.
Allowed users admin, operator, user
Moving to Specified Focus Position for VN-V685/686/686B
Format /api/param?camera.focus=data
Example to move to absolute 50.00 /api/param?camera.focus=50.00
Example to move to relative 5 Near /api/param?camera.focus=+5.00
Example to move to relative 5 Far /api/param?camera.focus=-5.00
Example to set to auto /api/param?camera.focus=easy_auto
Example to execute one push auto focus /api/param?camera.focus=op_auto
Example to change from auto to manual /api/param?camera.focus=manual
Example of Response camera.focus&200 OK
Interpretation Change focus. To move to absolute position, specify from 0.00 to 99.99. 0.00 means Near edge and