Hotkey operation – IOGear GCS1762 User Manual

Page 25

Text mode
Original mode

Hotkey Operation

Alternate Port Switching Keys

The port switching activation keys can be changed from tapping Scroll Lock key twice ([Scroll Lock] [Scroll
Lock]) to tapping Ctrl key twice ([Ctrl] [Ctrl]).

If you have a MAC keyboard (or your keyboard does not have Scroll Lock), you can change the port
switching activation keys by doing the following:

1. Invoke HSM (see page 19)
2. Press and release T

Now you can tap [Ctrl], [Ctrl] to switch between ports on your KVM. Please note that any hotkey operations
in the manual that use Scroll Lock, will now work with the new [Ctrl][Ctrl] port switching key.
Note: This procedure is a toggle between the two methods. To revert back to the original port switching
keys, repeat the above procedure.