IOGear GCS1762 - Manual (Page 24)

Alternate HSM Invocation Keys
In case the default HSM invocation keys (Num Lock and Minus) are not optimal in your setup, you may
change them to Ctrl and F12, respectively.
To switch to an alternate HSM invocation, do the following:
1. Invoke HSM (see page 19)
2. Press and release H
3. This will change the HSM invocation key to Ctrl and F12 (instead of Num Lock and Minus).
Note: This procedure is a toggle between the two methods. To revert back to the original HSM invocation
keys, repeat the above procedure again.
22
Hotkey Operation