Additional settings (option), Resetting the adjustments (reset) – IBM P97 User Manual

Page 14

Additional settings (OPTION)

You can lock the controls, change the on-screen language, change
the menu position.

Press the

button.

The menu appears on the screen.

Press the

m/M buttons to highlight

OPTION and press the

button.

The OPTION menu appears on the screen.

Press the

m/M buttons to select the desired

adjustment item.
Adjust the selected item according to the following
instructions.

x Locking the controls (CONTROL LOCK)

You can protect the adjustment data by locking the controls.
Press the

m/M buttons to highlight

(CONTROL

LOCK) and press the

button. Then press the

m/M

buttons to select ON and press the

button.

Only the 1 (power) button,

button,

, and

(CONTROL LOCK) of the

OPTION menu will operate. If

any other items are selected, the

mark appears on the screen.

To cancel the control lock
Repeat the procedure above and set

(CONTROL LOCK) to OFF.

x Changing the on-screen language

(LANGUAGE)

See page 6.

x Changing the menu’s position

(OSD POSITION)

Change the menu’s position if it is blocking an image on the
screen.
Press the

m/M buttons to select

(OSD POSITION)

for horizontal adjustment, or

(OSD POSITION) for

vertical adjustment and press the

button. Then

press the

</, buttons to shift the on-screen menu.

Then press the

button.

Resetting the adjustments (RESET)

This monitor has the following 2 reset methods.

x Resetting all the adjustment data for the

current input signal

Press the

button.

The menu appears on the screen.

Press the

m/M buttons to highlight

0 RESET and press the

button.

Press the

m/M buttons to select 01 (CURRENT

MODE) and press the

button.

Press the

m/M buttons to select OK.

Note that the following items are not reset by this method:
• on-screen menu language (page 6)
• color mode setting in the COLOR menu (PRESET,

VARIABLE, EXPERT, sRGB) (page 10)

• color temperature setting in the PRESET mode (9300K,

6500K, 5000K) (page 11)

• on-screen menu position (page 12)

x Resetting all of the adjustment data for all

input signals

Select 02 (ALL MODES) in step 3 above.

Note
The RESET function does not function when

(CONTROL LOCK)

is set to ON.

RESET

CURRENT

MODE

CANCEL

1
2

1 2 8 0 x 1 0 2 4 / 8 5 H z