InSciTek Microsystems 9102 - Manual (Page 26)

635 Crosskeys Office Park • Fairport, NY 14450 • Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com
© 2004 InSciTek Microsystems, Inc. All rights reserved. Allworx is a registered trademark of InSciTek Microsystems. All other names may be trademarks or registered trademarks
of their respective owners.
22
Wall mounting your phone (Optional)
Your phone is wall mountable and requires a wall mounting plate. The mounting plates
are available from your local telephone company or your local retailer.
If using a standard telephone wall mounting plate, DO NOT make any connection
to the RJ 11 jack. This connection is intended for an analog phone and may cause
damage to the Allworx phone, voiding your warranty.
The mounting plate, similar to the one shown below, has mounting studs to receive the
telephone base and is positioned to secure the Allworx telephone flush to wall surface.
Collapse the Allworx phone base to the horizontal position and mount the phone over the
mounting plate studs. All power and RJ 45 cable connections should exit between the
phone body and the phone base and then be routed to the network connection and/or a
power connection.