InSciTek Microsystems 9102 - Manual (Page 14)

635 Crosskeys Office Park • Fairport, NY 14450 • Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com
© 2004 InSciTek Microsystems, Inc. All rights reserved. Allworx is a registered trademark of InSciTek Microsystems. All other names may be trademarks or registered trademarks
of their respective owners.
10
Place a call on Hold
If you’re on a call and want to put it on hold, press Hold and put the handset on the hook.
The button for the call will blink red briefly. When you’re ready to talk again, pick up the
handset and you’ll automatically pick up the call on hold.
You can put more than one caller on hold. If you have more than one call on hold, then
the calls will be displayed on the screen when you pick up the handset. When you pick up
the handset you will automatically pick up the most recent call. To pick up a different call
on hold, press the flashing button for the call or use the up and down buttons to display
the call on the screen, then press Select.
If you have a call on hold and a new call comes in, you’ll answer the new call when you
lift the handset.
The caller will hear Music on Hold during the hold time, if available.
Park a call (PBX Mode)
A call may be parked by making an attended transfer to extension 700 – Do not blind
transfer to 700, as the call will be disconnected.
•
Press Transfer.
•
Select a second call appearance
•
Dial Extension 700.
•
The parking location will be announced (701 – 709)
•
Press Transfer again. The call is now parked in the announced position.
•
To retrieve the parked call, dial the park location extension from any phone (i.e.
701)
•
If you want to cancel the transfer, press Release . To return to the caller, press
the appearance where the call is on hold.
Park a call (Key System Mode)
In Key System mode, a Parked call can be picked up by any phone. A Parked call can
also be on Privacy Hold for that phone.
•
To Park a call, answer the incoming call on a Line Appearance button. Depress
the hold button, and the call will be parked. Any other phone that is monitoring
the same outside line will be flashing read and can pick up the call.
•
To perform a Privacy Hold, continue to depress the Hold button past the time it
takes to Park the call) and the call will be on Privacy Hold for that particular
phone. Any other phone that is monitoring the same outside line will be solid red
and cannot pick up the call.
•
If the hold button is held, it will toggle back and forth between Park and Hold.
Prevent incoming calls (Do Not Disturb)
1. With the handset on the hook, press Mute/DND. (DND stands for Do Not
Disturb.)
2. The light on the Mute/DND button will appear amber.