InSciTek Microsystems 9102 - Manual (Page 15)

635 Crosskeys Office Park • Fairport, NY 14450 • Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com
© 2004 InSciTek Microsystems, Inc. All rights reserved. Allworx is a registered trademark of InSciTek Microsystems. All other names may be trademarks or registered trademarks
of their respective owners.
11
3. With DND enabled, your phone will not ring and all calls targeted for you will
follow the next step in your active call route.
4. Press Mute/DND second time to receive. The light will turn off.
Placing and splitting a conference call
After connecting to the first person you want on the conference call.
1. Press Hold.
2. Select another Call Appearance and call the second person you want on the
conference call.
3. Press Conference.
4. Press the Call Appearance button where the first person is on hold.
5. All three callers are now available to each other. The Conference button is
illuminated solid red.
6. Any party may exit the conference by hanging up and the remaining two parties
will remain connected.
7. If you desire to have a sidebar with one of the parties, you may split the
conference by:
a. The display will show the two parties involved in the conference, select
the person you wish to put on hold using the navigation arrows, and
press Hold.
b. You may now talk to the remaining party.
c. The call appearance button for the person on hold will be flashing, to
have them re-join the conference, select the call appearance and press
Conference; the three-way conference is then re-established.
Speed dial
You can program your frequently called numbers and call them with the touch of a button.
When a speed-dial button is pressed, it acts exactly the same as picking up the handset
and dialing the number.
•
Your System Administrator programs other Allworx extensions as Speed Dial
numbers if your programmable buttons are defined as Speed Dial/Busy Lamp
Field. Once set up, press any speed dial button to call the number you are
dialing.
•
You can set up to 10 (0 – 9) Personal Speed Dial numbers using the CONFIG
menu of the Allworx phone. These can be any numbers from long distance
phone numbers to Credit Cards. Simply pick up the phone, select the SPDIAL
Softkey and dial the digit that your number is mapped to.
•
Programmable Buttons can be defined as speed dials.
•
The first button defined as a speed dial will be mapped to the 0 entry in your
personal directory, the second mapped to 1 and on through 9.
Speakerphone
Press Speaker for hands-free use of the phone.