Intel ZT8101 - Manual (Page 116)

116 ZT8101 Users Guide
Using the Web Console
4. Configure these fields.
5. Click Apply.
Multicast Global Configurations
The Multicast Global Configurations screen is only for globally enabling or disabling the multicast
routing protocols on the switch. Each VLAN or IP Interface uses these global values unless you
configured it to use specialized settings. The protocol must be enabled globally before you can
enable it on a specific VLAN or IP interface. (RIP is globally set up with the RIP Configuration
option.)
To configure globally the multicast protocols
1. In the left panel, click Layer 3 IP Networking.
2. In the top panel under IP Multicast Routing Protocols, click Multicast Global
Configurations.
3. Configure these fields.
4. Click Apply. Each protocol has a corresponding configuration form.
Field Description
Tx Mode
Specifies which version of the RIP protocol will be used to transmit RIP
packets. This field toggles between Disabled, V1 Only, V1 Compatible, and
V2 Only. Disabled prevents the transmission of RIP packets.
Rx Mode
Specifies which version of the RIP protocol will be used to interpret received
RIP packets. This field toggles between Disabled, V1 Only, V2 Only, and V1
and V2. Disabled prevents the reception of RIP packets.
Authentication.
Enables or disables authentication between routers. When authentication is
enabled, a password is used to authenticate communication between
routers on the network. Authentication is only supported when RIP is in V1
Compatible or V2 mode.
Password
Specifies the password to be used to authenticate communication between
routers on the network.
Field Description
Switch IGMP Snooping
Enables or disables, globally, Internet Group Management Protocol
(IGMP) snooping. This protocol allows the switch to forward
multicast traffic intelligently on the switch.
DVMRP
Enables or disables, globally, the Distance-Vector Multicast Routing
Protocol (DVMRP).
DVMRP Include Report From
Unknown Neighbors Enables or disables receiving DVMRP reports from unknown
neighbors.
PIM-DM
Enables or disables, globally, the Protocol Independent Multicasting
- Dense Mode (PIM-DM) multicasting protocol.