Impex PHC 715 - Manual (Page 6)

STEP 2 (See Diagram 2)
A.) Attach the Seat Bracket (#4) to the short pivot tube on the Main Seat Support (#3).
Secure it with one M10 x 4 ¾” Allen Bolt (#39) and M10 Aircraft Nut (#42). Place the
Seat Pad (#16) onto the Seat Bracket (#4). Secure it with four M6 x 5/8” Philips Head
Screws (#38) and
∅
½” Washers (#44). Insert a L-shaped Pin (#31) into the selected
hole on the Seat Bracket to obtain the desired incline of the Seat.
B.) Attach the side-holes of Backrest Supports (#6) to the long pivot tube on the Main Seat
Support (#3). Secure it with one M10 x 7 ¼” Hex Bolt (#50), two
∅
¾” Washers (#43),
and one M10 Aircraft Nut (#42). Place the Backrest Board (#17) onto the Backrest
Supports (#6). Secure it with four M6 x 1 3/8” Philips Head Screws (#37) and
∅
½”
Washers (#44).
DIAGRAM 2
5