Intermate Twinax Connection LX T-04 - Manual (Page 24)

C o n f i g u r a t i o n
24 U s e r ‘ s G u i d e
Exit the Configuration
Select 'Exit' in the Main Menu.
The following submenu is shown:
==============================================================
SAVE
==============================================================
EDIT CONFIGURATION
_Yes
No
Please remember to set the Device Address on the Address
Switch!
Power off before connecting to the system.
Use to move, to Select
Select 'Yes' to exit the configuration.
The Configuration Utility is terminated and the screen is left blank.
Power off the printer, disconnect the terminal and connect the Intermate LX
T-04 to your IBM system.
If you select 'No' in this submenu the Main Menu is displayed again.
Note: If you exit without saving, the changes you have made to the
configuration are lost when the printer is switched off.